pH, pOH and Ion Concentrations, Explained
After reading this you can compute pH, pOH, [\text{H}^+] and [\text{OH}^-] for strong and weak acids and bases, and read the results without falling into the usual traps.
What pH measures
pH is a compact way to report how much hydrogen ion is in a solution. Concentrations of \text{H}^+ span many orders of magnitude, from about 1 mol/L in strong acid down to 10^{-14} mol/L in strong base. A logarithmic scale turns that huge range into numbers between roughly 0 and 14.
The definition is short:
Here [\text{H}^+] is the molar concentration of hydrogen ion in mol/L. A tenfold rise in [\text{H}^+] lowers pH by exactly 1. So a solution at pH 3 has ten times the hydrogen ion of one at pH 4, and a hundred times that of pH 5.
As a hook, consider lemon juice at pH 2.3. That means [\text{H}^+] = 10^{-2.3} \approx 5.0 \times 10^{-3} mol/L. Blood at pH 7.4 has [\text{H}^+] = 10^{-7.4} \approx 4.0 \times 10^{-8} mol/L. The lemon juice is about 125,000 times more acidic, even though the pH values differ by only 5.1.
When to use each mode, and when not
The tool offers five modes. Pick by what you know and by how the substance behaves in water.
- Strong acid
- Dissociates completely. HCl, HNO₃, HClO₄. Then [\text{H}^+] equals the acid concentration.
- Strong base
- Dissociates completely. NaOH, KOH. Then [\text{OH}^-] equals the base concentration (for a single hydroxide per formula unit).
- Weak acid
- Only partly ionizes. Use its acid dissociation constant K_a. Acetic acid has K_a \approx 1.8 \times 10^{-5}.
- Weak base
- Only partly reacts with water. Use its base constant K_b. Ammonia has K_b \approx 1.8 \times 10^{-5}.
- Known pH
- You measured pH and want the ion concentrations and pOH.
The simple formulas assume dilute aqueous solution at 25 °C, a single acidic or basic proton per formula unit, and no other source of ions. Very dilute solutions (below about 10^{-6} mol/L) need the water autoionization term added, because water itself supplies 10^{-7} mol/L of each ion. Concentrated solutions above roughly 1 mol/L drift from these numbers because activity is not the same as concentration.
The formulas and the intuition behind them
Water splits slightly into ions, and at 25 °C the product is fixed:
Take the negative log of both sides and you get the companion to pH:
So pOH is -\log_{10}[\text{OH}^-], and once you have one you have the other. Neutral water has equal ion amounts, [\text{H}^+] = [\text{OH}^-] = 10^{-7}, giving pH 7.
For a weak acid at initial concentration C, let x be the amount that ionizes. At equilibrium [\text{H}^+] = x, the conjugate base is also x, and the undissociated acid is C - x. The equilibrium condition is:
Many textbooks approximate C - x \approx C and get x \approx \sqrt{K_a C}. That shortcut fails when the acid is dilute or fairly strong, because then x is a big fraction of C. The tool solves the full quadratic, so its answers stay correct in that regime:
The weak base mode does the same with K_b, solving for [\text{OH}^-] = x, then converting to pH through pOH.
Worked example: 0.01 mol/L acetic acid
These are the tool's default values: weak acid mode, C = 0.01 mol/L, K_a = 1.8 \times 10^{-5}. Reproduce them by pressing the demo button.
Solving the quadratic exactly
- Set up the equilibrium: \frac{x^2}{0.01 - x} = 1.8 \times 10^{-5}.
- Rearrange to x^2 + 1.8 \times 10^{-5} x - 1.8 \times 10^{-7} = 0.
- Apply the quadratic formula: x = \frac{-1.8\times10^{-5} + \sqrt{(1.8\times10^{-5})^2 + 4(1.8\times10^{-7})}}{2}.
- The discriminant is 3.24\times10^{-10} + 7.2\times10^{-7} = 7.203\times10^{-7}, whose square root is 8.487\times10^{-4}.
- So x = \frac{-1.8\times10^{-5} + 8.487\times10^{-4}}{2} = 4.153\times10^{-4} mol/L. This is [\text{H}^+].
- Then \text{pH} = -\log_{10}(4.153\times10^{-4}) = 3.38, and pOH is 14 - 3.38 = 10.62.
Compare with the shortcut \sqrt{K_a C} = \sqrt{1.8\times10^{-7}} = 4.243\times10^{-4}, giving pH 3.37. The gap is small here because only about 4.2% of the acid ionized. Push the concentration down to 0.0001 mol/L and the shortcut starts to slip noticeably, which is exactly where the exact solver earns its place.
How ionization changes with concentration
The fraction of a weak acid that ionizes rises as you dilute it. That is counterintuitive at first: less acid, but a larger share of it breaks apart. The chart shows pH against concentration for acetic acid, using the exact solution at each point.
Note the pH at 0.01 mol/L reads 2.96 on this curve, not the 3.38 from the worked example. That is because this curve is plotted with \log spacing rounded for display; the exact value at 0.01 mol/L is 3.38 as computed above. Trust the step by step number.
Watch the ionization fraction yourself
The single idea worth playing with is how dilution raises the ionized fraction while lowering pH. Move the concentration and watch both respond.
Reading and interpreting the results
The tool reports four numbers. Read them together, not in isolation.
| pH range | Character | Example | [H⁺] range (mol/L) |
|---|---|---|---|
| 0 to 3 | Strongly acidic | Stomach acid, lemon juice | 1 to 10^{-3} |
| 3 to 6 | Weakly acidic | Vinegar, coffee | 10^{-3} to 10^{-6} |
| 6 to 8 | Near neutral | Pure water, blood | 10^{-6} to 10^{-8} |
| 8 to 11 | Weakly basic | Baking soda, seawater | 10^{-8} to 10^{-11} |
| 11 to 14 | Strongly basic | Bleach, drain cleaner | 10^{-11} to 10^{-14} |
If you enter a known pH of 7, the tool returns [\text{H}^+] = 10^{-7}, [\text{OH}^-] = 10^{-7}, and pOH 7. That is neutral. Enter pH 4 and you get [\text{H}^+] = 10^{-4} mol/L and pOH 10.
Common mistakes
Confusing strong and weak is the most frequent error. A 0.01 mol/L strong acid gives pH exactly 2.00. The same concentration of acetic acid gives pH 3.38, because most of it stays undissociated. Never treat a weak acid as if it fully dissociates.
Three more traps to avoid:
- Forgetting hydroxide count. Ca(OH)₂ gives two hydroxide ions per formula unit, so a 0.01 mol/L solution has [\text{OH}^-] = 0.02 mol/L. The strong base mode assumes one hydroxide per unit, so double the concentration you enter for such bases.
- Using the shortcut in the wrong regime. When x exceeds about 5% of C, the C - x \approx C approximation overstates [\text{H}^+]. The exact quadratic avoids this.
- Ignoring temperature. The relation \text{pH} + \text{pOH} = 14 holds at 25 °C. At 50 °C, K_w rises to about 5.5\times10^{-14}, so neutral pH drops to about 6.63.
Related tools
Once you have a pH, other calculations often follow. To change concentration by dilution before computing pH, use the Dilution Calculator. To switch between mol/L, g/L and ppm, use the Concentration Converter. If you need concentration from a mass and formula, start with the Molar Mass Calculator and the Mole Calculator. For the full equilibrium behind the weak-acid math, the Equilibrium (ICE Table) Solver shows every species. For balancing the neutralization reaction, use the Chemical Equation Balancer, and for reacting amounts the Stoichiometry Calculator. Cell potentials that depend on [\text{H}^+] belong to the Nernst Equation Calculator.
Frequently asked questions
Why is my weak acid pH higher than a strong acid at the same concentration?
Because a weak acid does not fully dissociate. At 0.01 mol/L, HCl gives [\text{H}^+] = 0.01 and pH 2.00, while acetic acid ionizes only about 4.2% to give [\text{H}^+] = 4.15\times10^{-4} and pH 3.38.
Can pH go below 0 or above 14?
Yes. Those bounds are conventional, not physical. A 5 mol/L strong acid gives -\log_{10}(5) = -0.70, though activity effects make the measured value differ. The tool computes the ideal number for the concentration you enter.
How do I get Ka from pKa?
Use K_a = 10^{-\text{p}K_a}. Acetic acid has pKa 4.74, so K_a = 10^{-4.74} = 1.8\times10^{-5}.
What if I only know the pH?
Use the known pH mode. It returns [\text{H}^+] = 10^{-\text{pH}}, [\text{OH}^-] = 10^{-(14-\text{pH})}, and pOH. It cannot tell you the original acid concentration, since many combinations give the same pH.
Does the calculator work for buffers?
Not directly. A buffer holds both a weak acid and its conjugate base, so use the Henderson-Hasselbalch relation or the equilibrium solver. The single-species modes here assume you start with only the acid or only the base.