Meeting Cost Calculator, Explained
After reading this you can price any recurring meeting in three ways (per occurrence, per minute and per year) and judge whether its output justifies the salary it burns.
What a meeting cost is
A meeting has no invoice, but it has a price. Every minute in the room, the people sitting there are being paid for something else they could be doing. Their salary keeps running. The cost of the meeting is simply the sum of everyone's pay for the time they spend in it.
Here is the hook. Take six people whose average gross salary is 5000 per month. Put them in a room for one hour. That single hour costs about 173 in salary. Hold the meeting weekly, and it costs roughly 8654 per year. Nobody writes that number down, so nobody questions it.
The tool converts a monthly salary into a per-minute rate, multiplies by attendees and length, then scales to a year using the cadence you enter. The rest of this article shows the arithmetic so you can trust the figures and adjust the assumptions.
When to use it, and when not to
Use it to compare a meeting against its cost. A weekly status update that runs long is a candidate. A recurring review with ten attendees is another. Price it, then ask whether the output is worth that much salary. Often the answer is yes. Sometimes the meeting could be shorter, smaller, or an email.
Do not use the raw number as a hard budget or as ammunition to cancel every meeting. Meetings produce decisions, alignment and trust, none of which appear in this calculation. The figure is a prompt for a question, not a verdict.
Salary alone understates the true cost. Employer taxes, office space and equipment typically add 30 to 50 percent on top, and the interruption of switching tasks costs more still. Treat the tool's output as a floor, not a ceiling.
The formula and the intuition behind it
Start with one person's pay per minute. A monthly salary S covers a month of work. To spread it across working minutes, divide by the number of working hours in a month, then by 60. A common convention is 173.33 working hours per month, which comes from 40 hours per week times 52 weeks divided by 12 months.
Here r is the cost per minute for one person and S is the gross monthly salary. With S = 5000, that gives r \approx 0.4808 per minute per person.
Now scale up. Multiply by the number of attendees n and the meeting length m in minutes to get the cost of one occurrence.
Finally, multiply by the number of times the meeting happens per year, y, to get the annual cost.
The intuition is that a meeting is a rectangle: people on one side, minutes on the other. Double either side and the cost doubles. Halve the length and you halve the cost. That linearity is why trimming a recurring meeting pays off so predictably.
Reproducing the demo numbers
Use the tool's defaults: 6 attendees, 5000 average gross monthly salary, 60 minutes, 50 occurrences per year.
- Per-minute rate for one person: 5000 \div (173.33 \times 60) = 5000 \div 10400 \approx 0.4808.
- Cost per minute for the room: 0.4808 \times 6 \approx 2.885.
- Cost of one 60-minute occurrence: 2.885 \times 60 \approx 173.1.
- Cost per year at 50 occurrences: 173.1 \times 50 \approx 8654.
So the meeting costs about 173 each time, 2.88 per minute, and 8654 per year. Add a 40 percent overhead for taxes and facilities and the annual figure climbs to roughly 12120.
See how length and attendees move the cost
Because the cost is a product, the two levers you control most easily are length and headcount. The chart below holds salary at 5000 and cadence at 50 per year, and shows the annual cost for a six-person meeting as its length changes.
Reading and interpreting the three numbers
The tool reports three figures, and each answers a different question.
- Per occurrence
- The salary burned in one sitting. Compare it to the value of the decision the meeting produces. If a weekly sync costs 173 and settles nothing that email could not, that is the number to challenge.
- Per minute
- The running meter. At
2.88per minute for six people, ten minutes of tangent costs about 29. This is the figure that makes lateness and rambling visible. - Per year
- The recurring commitment. A meeting that feels harmless at 173 becomes an 8654 line item once you multiply by 50. This is where the strongest case for change usually lives.
A useful move is to translate the annual figure into something concrete. At 8654 per year, that recurring hour is worth roughly two months of one person's gross salary of 5000. Ask whether the meeting delivers that much.
Common mistakes
The first mistake is using take-home pay instead of gross. The cost to the employer is the gross salary, not what lands in the bank. If you want to reason about net pay, that is a different question handled by the Take-Home Pay Calculator.
The second is ignoring overhead. Salary is only part of what an employee costs. Adding 30 to 50 percent for taxes, space and equipment is closer to the truth, and the interruption cost of pulling people out of focused work is real but hard to price.
The third is mixing up cadence. "Weekly" is about 52 occurrences per year, "every two weeks" is 26, and "monthly" is 12. Entering the wrong number rescales the annual figure directly. Enter 52 instead of 50 and the yearly cost rises from 8654 to about 9000.
The fourth is averaging salaries carelessly. If two senior people earning 9000 sit with four juniors earning 3000, the average is 5000 and the tool is accurate. But a room of ten people where one earns far more than the rest can still be dominated by that one salary, so check that your average reflects who is actually attending.
Before cutting a meeting, price the cheaper alternative. A 15-minute stand-up for six people costs about 2164 per year against 8654 for the full hour. The saving of roughly 6490 is the number worth acting on.
How the cost splits across people and time
It helps to see where the annual 8654 goes. The table below breaks the default meeting into per-person shares and shows how the total grows as you add attendees, holding length and cadence fixed.
| Attendees | Per occurrence | Per year | Per person per year |
|---|---|---|---|
| 2 | 57.69 | 2885 | 1442 |
| 4 | 115.4 | 5769 | 1442 |
| 6 | 173.1 | 8654 | 1442 |
| 8 | 230.8 | 11540 | 1442 |
| 10 | 288.5 | 14420 | 1442 |
The per-person share stays at 1442 because the salary and time are constant. The total rises in step with headcount. That is the argument for keeping the invite list short: every extra person adds a full 1442 per year at this cadence, whether or not they speak.
Related tools
To find the hourly rate that feeds this calculation, use the Salary to Hourly Calculator. If you price your own time for meetings you attend as a contractor, the Freelance Hourly Rate Calculator shows the rate you need to hit an income target. To weigh a raise that changes these salary figures, see the Pay Raise Calculator. And to value the time spent getting to an in-person meeting, the Commute Cost Calculator prices both fuel and hours.
Frequently asked questions
Why does the calculator use gross salary and not net?
Because the cost to the organisation is the gross figure. Net pay is what the employee keeps after deductions, which is smaller and irrelevant to what the meeting costs to run. If anything, the real cost is higher than gross once overhead is added.
How many working hours per month does it assume?
About 173.33, from 40 hours a week times 52 weeks divided by 12 months. That gives a per-minute rate of about 0.4808 on a 5000 salary. If your standard week differs, the rate shifts in proportion.
Should I add employer taxes and office costs?
For a truer figure, yes. A rough way is to multiply the salary-based result by 1.3 to 1.5. The default output is the salary floor, which is easy to defend and hard to argue with.
What cadence number should I enter for a weekly meeting?
Use 52 for a strict weekly meeting, or lower it to account for holidays and cancellations. Many teams meet about 45 to 50 times a year in practice, which is why 50 is the default.
Does a shorter meeting really save that much?
Yes, and the saving is exactly proportional. Cutting the default meeting from 60 to 45 minutes drops the annual cost from 8654 to about 6490, a saving of roughly 2164 for one quarter-hour trimmed.